blog
Home Blog

How to solve the abnormal noise of wiper blade?

How to solve the abnormal noise of wiper blade?

Dec 26, 2025

When driving in rainy weather, the wiper blades are not clear, and abnormally noisy and vibrating. Please immediately check whether the glass of your car is greasy, muddy, or whether the windscreen wiper blades are aging. After inspection and treatment, the wiper is still not clear and noisy, please replace the windshield wiper blade immediately.

 

Here are the common causes and step-by-step solutions for solving noisy wiper blades, organized by symptom:

Quick Self-Check & Solution Guide:

Symptom / Noise Type Most Likely Cause Step-by-Step Fix (Easiest to Hardest)
Squeaking / Screeching 1. Worn, hardened, or uneven blade edge
2. Dirty windshield (oil, wax, debris)
3. Improper blade angle or tension
1. Deep Clean Windshield: Use a dedicated automotive glass cleaner or clay bar to remove grime.
2. Clean Wiper Rubber: Wipe the blade edge with a cloth dipped in rubbing alcohol or vinegar-water mix.
3. Replace Wiper Blades: If cleaning fails, replacement is the most reliable fix.
Chattering / Skipping & Noise  1. Windshield not perfectly clean
2. Blade not fully contacting glass (warped frame, weak springs)
3. Wiper arm tension/angle issue.
1. Thoroughly Clean Glass (as above).
2. Check Wiper Arm: Lift the arm; it should snap back firmly. If loose, the spring may be weak.
3. Adjust Wiper Arm Angle: For advanced DIYers; otherwise, seek a mechanic.
Noise in One Direction  Uneven wear on the wiping edge, causing different friction. 1. Clean the blade.
2. Replace the wiper blade insert or entire assembly.
“Clunking” Mechanical Noise Worn or dry linkage/pivot points in the wiper transmission. Apply a small amount of white lithium grease to linkage joints. Avoid over-greasing.

 

Key Operation Tips & Prevention:

  • The Golden Rule: Clean Thoroughly 90% of noise comes from a dirty windshield. Regular car washes don't remove invisible oily film. Use a dedicated glass cleaner.
  • Use “Home Remedies” with Caution Methods like sanding the rubber with sandpaper are often temporary and can damage the blade. Not recommended.
  • When to Replace If noise persists after cleaning, or if the rubber shows cracks, stiffness, chips, or is over 1 year old, replacement is the best solution.

·  Preventive Maintenance

  • Always use washer fluid before wiping on a dry windshield.
  • Clean the blade edges monthly with a wet cloth.
  • Lift wipers off the glass during extended parking (especially in hot/cold weather) to prevent rubber deformation.

 

If you want to find good quality wiper blade, pls consider Xiong Shun Automobile Material (Xiamen)Co.,Ltd. It is a professional Wiper Blade manufacturer with more than 40 years‘s experience, produce many types wiper blades,including bus wiper blade, snow and ice wiper blades,back windscreen wiper, marine wiper blade ,heavy duty wiper blade refill , etc.

 

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Home

Products

contact